• Non-volatile memory backup
  • Accuracy +/- 0.25% of span with 1 least significant digit
  • 4 password protected security levels
  • RS-485 serial communication
  • Loop break protection
  • Peak/Valley indication
  • 10 amp solid state relay output
  • Illuminated keypad
  • Intelligent self-tuning
  • Type J thermocouple input
  • NEMA 4X (IP66) rated front panel
  • UL and CE approved

The 116-DZ series dual zone temperature controller is a complete temperature control unit housed in a 1/16 DIN desktop instrument housing with a maximum load output rating of 10 amps. Power input to the control is provided via an IEC standard 120V inlet. Load power is supplied through a fuse protected, Deutsch 7-pin circular connector, and can be switched on and off from the front panel. Each controlled zone is on its own circuit.

The series 116-DZ temperature controller comes with single set point and dedicated alarm limit, percent output indication, and heater break protection. Process protection features include: open sensor protection, shorted sensor protection, input rate of change protection, and loop break protection.